Why We Only Measure 0.5 and 5.0 micron Particles In Cleanrooms
During particle count, we measure only 0.5 and 5.0-micron particles because most of the commonly found bacteria are in the size range of 0.5 to 5.0 micron so this size range is the main source of contamination...
Read more
Cleaning Procedure For Enteric Coating Pan
Standard cleaning Procedure for a tablet coater after the enteric coating process. 1.0 Purpose The purpose of this Standard cleaning procedure is to establish a standard cleaning procedure for washing ...
Read more
Pass Box In Pharma
Every one of us who has ever worked there in the pharma industry will be familiar with the concept of achieving & maintaining the status of clean rooms or classified ...
Read more
Door Interlocking In Pharmaceutical Industries
Interlocking is the locking system which is applied to the doors of airlocks to ensure that both doors are not opened at the same time...
Read more
Wash In Place (WIP) Clean In Place (CIP)
Washing is a major part of various activities performed in different industries like the dairy and pharmaceuticals. As we know in the pharmaceutical industry we have to perform cleaning activities ...
Read more
HVAC and Mixing MCQs
Q:1 HVAC stands for which of the following? a)Heating ventilation and air cooling. b)Humidity ventilation and air conditioning. c)Heating ventilation air Compressing. d)Heating ventilation and air conditioning The right answer ...
Read more
Active Pharmaceutical Ingredient
The active pharmaceutical ingredient is the main component of any dosage form that is pharmacologically active & provides desired therapeutic effects. Active Pharmaceutical Ingredient Definition The active pharmaceutical ingredient also ...
Read more
Calibration Frequency Of Measuring Instruments
One of the most confusing questions for professionals working in any pharmaceutical industry or area where measurements are involved is, What should be the calibration frequency?or When equipment or instruments ...
Read more
SOP For Automatic Tablet Coating System
Standard Operating Procedure for perforated coating pan system or automatic tablet coater. 1.0 Purpose The purpose of this SOP is to establish a standard procedure for operating the coating pan ...
Read more
Cleaning Validation In Pharmaceutical Industry
Cleaning validation is a process that is gaining more & more attention day by day in the pharma industries. The reason behind its highest demand is that most of the ...
Read more
Separate Manufacturing Facility For Penicillin And Non Penicillin Products
In this article, we will discuss the answer to a very common but confusing question regarding penicillin hypersensitivity & manufacturing facility of penicillin in the pharmaceutical industry. We will also ...
Read more
Sticking And Picking During Tablet Coating
Tablet coating defects or problems observed during tablet coating is a very important topic & in this article, we will discuss tablet sticking and picking,which are one of the most ...
Read more
SOP For Compression Machine
Standard Operating Procedure for compression machine or rotary Compression Machine. 1.0 Purpose The purpose of this SOP is to establish a standard procedure for operating the compression machine. 2.0 Scope ...
Read more
SOP For Fluidised Bed Dryer
Standard Operating Procedure for Fluidised Bed Dryer (FBD) 1.0 Purpose The purpose of this SOP is to establish a standard procedure for operating the Fluid Bed Dryer. 2.0 Scope This ...
Read more
Metal Detector
Pharmaceutical industries are involved in manufacturing a large number of oral solid dosage forms like tablets, capsules, granules and powders.The manufacturing of these products involves different equipment and steps and ...
Read more